{"id":786,"date":"2025-08-21T13:40:31","date_gmt":"2025-08-21T13:40:31","guid":{"rendered":"https:\/\/content.agfmfg.com\/blog\/?p=786"},"modified":"2025-08-27T16:47:47","modified_gmt":"2025-08-27T16:47:47","slug":"benefits-of-corner-mounted-floor-control-assemblies","status":"publish","type":"post","link":"https:\/\/content.agfmfg.com\/blog\/benefits-of-corner-mounted-floor-control-assemblies\/","title":{"rendered":"Smarter Layouts for Safer Buildings: The Benefits of Corner-Mounted Floor Control Assemblies"},"content":{"rendered":"

In multi-story buildings, floor control assemblies are essential for isolating, draining, and testing individual floors of a sprinkler system. However, finding space to install these assemblies, especially in tight stairwells or shared mechanical areas, can be a challenge. That\u2019s where corner-mounted designs like the AGF Model 8611 Corner Riser offer a practical, code-conscious solution.<\/p>\n

Whether used as a floor control assembly or a main riser, the 8611 is engineered to reduce obstructions, support accessibility, and simplify installation.<\/p>\n

The Space Challenge in Stairwells and Corridors<\/strong><\/h4>\n

Floor control assemblies are often installed in stairwells of hotels, apartment buildings, and high-rises. These spaces are highly trafficked, frequently narrow, and must remain clear for emergency egress. Flat wall-mounted assemblies can protrude significantly, posing hazards and potentially violating ADA and local building codes.<\/p>\n

By mounting the assembly in a 90-degree corner, Model 8611<\/a> significantly reduces its profile, helping maintain safe, unobstructed walkways.<\/p>\n

Alternatively, the corner riser can be mounted horizontally and tucked into the corner between the ceiling and wall. This offers a space-saving solution while being able to access the TESTanDRAIN<\/span> <\/a>handle for testing and the 7000L pressure relief valve<\/a>. AGF\u2019s three-way gauge valve has always been accessible since its redesign, which rotates the handle so it should never need to face the wall or ceiling while having the pressure gauge facing out.<\/p>\n

<\/p>\n

Cane Sweep & ADA Compliance<\/strong><\/h4>\n

According to ADA Section 307, wall-mounted fixtures between 27 inches and 80 inches above the floor must not project more than 4 inches into corridors or paths of travel unless they are within cane-detectable range. This is known as the \u201ccane sweep\u201d rule, which exists to protect individuals who use mobility aids, such as canes or walkers.<\/p>\n

The 8611 Corner Riser helps with:<\/h4>\n